Parts under review / High-Temperature Oven Lamp
High-Temperature Oven Lamp
- A
- Glass envelope diameter
- B
- Overall length including the base
- C
- Screw base — commonly E14 or E27
The base type is the only thing that decides whether it screws in. Check the lamp holder and the switch before ordering — heat kills holders faster than filaments, and a new bulb in a tired holder lasts days.
Reference illustration, not to scale and not a product photograph. We will add actual sample photos and measurements after verification. Need the figures now? Ask on WhatsApp.
Reference photo
Heat-resistant bulb for the oven chamber light.
Useful first checks. Check the lamp holder and the switch before ordering. A blown bulb is obvious; a failed holder looks identical from outside and a new bulb will not fix it.
What this part is
An incandescent lamp rated for continuous service at oven chamber temperature, in a heat-resistant holder behind a glass cover.
How it fails
The lamp itself is often blameless. Heat degrades the holder contacts faster than it kills filaments, so a new bulb in a tired holder lasts days. The switch is the third suspect.
What decides whether a replacement fits
These are category-level selection factors, not specifications for a specific product. Confirm each value from the machine and the physical part.
| Parameter | Typical | Why it matters |
|---|---|---|
| Base type | E14 and E27 are the common screw bases | The only thing that decides whether it screws in. |
| Temperature rating | Confirm the continuous temperature rating from the lamp specification. | A standard household bulb in an oven fails in days and can shatter over the product. |
| Voltage and power | Read voltage and power from the lamp marking and machine specification. | Over-rating adds heat to a fitting already at its limit. |
| Glass envelope size | Must clear the cover glass and the reflector | A bulb touching the cover cracks it. |
The mistake people actually make. Replacing the bulb three times before checking the holder.
Product specifications to verify
| Base type | Not verified |
|---|---|
| Glass diameter | Not verified |
| Overall length | Not verified |
Electrical details to verify
| Voltage | Not verified |
|---|---|
| Power | Not verified |
| Temperature rating | Not verified |
Fits these models
We have not published a verified model list for this part yet. We only list a machine once we have measured the part against it or a customer has confirmed the install — a list padded with guesses is worth less than no list.
Send us your nameplate and a photo of the old part and we will review what the evidence supports.
What to photograph and measure
The base type is what matters. Photograph the old bulb base next to a ruler.
Help us understand your requirement
Product-specific fit, availability and sales information are being verified. Share your equipment and part details to support the research.
Brand and model names are used for identification only. Product-specific compatibility requires supporting evidence.
This page is a category guide. Product-specific specifications remain unpublished until checked against a physical sample.
Ask on WhatsApp